No sites on your map yet. Nothing matches that.
Serviceability
Showing global fallback results.
Nothing on the map yet
Start with a site: the tower or cabinet everything else hangs on. Or bring what your NMS already knows.
Someone with the manage permission can add the first site.
Checking coverage... Could not check this point.
Covered by
Coverage zones
Nearest tower:
No base stations on the map yet.
→
Line of sight ·
Checking terrain...- Distance
- Tilt to aim
- Tightest clearance
- at
- Ground at start
- Ground at end
To clear it
Equal masts cannot clear this path.
No mast up to 150 m clears this path. Pick another spot.
Drag A or B to try another spot. Height is the antenna above ground. Open elevation data (USGS and national surveys); trees and buildings are not in it.
Line of sight to the towers in view
No towers in view. Zoom out, or click the second point by hand.
Pick a tower for the full profile, or click anywhere on the map for the second point.
Base map
Show
Filter
Legend
Infrastructure
| 3 | Base station (device count) |
| ! | Device down |
| Client service | |
| Wireless client link | |
Sector / Link
Monitoring
| Root of the fault |
Down now
Selected client on map
- Client
- Service
- Package
- Connected to
- Link distance
- Mapped cable
- Cable length
Select an object on the map or start by adding one.
The device moves onto the site on Save, and its links follow.
Use same Site label for router, sectors and backhaul in one location.
Type is managed by selected device profile.
No profiles for this type yet. A profile sets the band, beamwidth and range for you.
New device profile
Saved to Device profiles for every radio you add after this one.
Selected profile requires assigned Feature type in Device Profiles settings.
Devices
No devices in this container.
Topology Loading...
Cabinet works as a container root. Add devices inside it, and use cable Connection + port labels to describe splice/patch behavior.
Splitter outputs
Set split ratio (for example 1:8) to define output capacity.
Outbound cables exceed splitter output capacity.
Inbound: Outbound: Free:
Set total ports to enable occupancy view.
Connected cables exceed available ports.
Used: Free:
Unassigned cables: (without mapped port label)
No connected cables.
Connected cables
Connected wireless links
Save the link first, then add the antenna on the tower.
Save the link first, then add the antenna on the tower.
For large networks, endpoint list is searched on-demand.
Line of sight
Checking terrain...- Distance
- Tilt to aim
- Tightest clearance
- at
- Ground at start
- Ground at end
To clear it
Equal masts cannot clear this path.
No mast up to 150 m clears this path. Pick another spot.
Earth curvature with k = 4/3; the band is 60% of the first Fresnel zone at the primary band. Terrain: open elevation data courtesy of the U.S. Geological Survey (3DEP, SRTM) and national surveys, via Mapzen terrain tiles. Trees and buildings are not in it.
Client service connection
Map client → cable bindingEnable "Clients on", click a client icon on map, then connect selected cable.
Connection type of this segment: splice = fusion, patch = patch panel, connector = connectorized joint, tap = RF tap.
Fiber Planning
Estimated free fibers:
Access Parameters
Outputs: Free:
PON Path Budget
Calculating...OLT:
OLT TX power:
Splitter checkpoints
Packages assigned to this location are offered automatically and stay in sync.
No packages defined yet.
·
Shown on the public availability page when the zone status is Live. Packages tagged "location" come from the selected location and sync automatically.
Loading...
No changes recorded yet. Saves from now on are kept here.
- →
Additional bands
Primary:
Frequency is managed by selected device profile.
Beamwidth is managed by selected device profile.
Ground elevation at mast: (height above ground is measured from here)
You have read-only access to network map.
Already on the map
Looking nearby...
New on this site
No device types available.
No loose devices within 2 km.
Cable tools Edit route, cut or trim
Unsaved changes
Cut cable
Choose what should happen at the cut point.